GFCI
60AMP LUNCH BOX GFCI

G Series portable power distribution center utilizes the latest GFCI technology to provide a higher level of safety. GFCI module protection gives user open neutral and reverse phasing protection. UL listed. Meets OSHA standards.

DEFIANT
EDISON GFCI

The 2 ft. In-Line GFCI is ideal for indoor and outdoor use. It features built in GFCI protection against hazardous shock from damaged cords or exposure to water. A convenient heavy duty 2 foot, 12-Gauge cord with 3 outlet triple tap extends protection to wherever is needed.

• Rainproof rated for indoor and outdoor use provides safety assurance for any electrically powered job

• Construction and industrial grade

• 2 ft. 12-Gauge heavy duty cord

• Triple tap 3 outlet female connector allows for multiple usage

• GFCI safety assurance, OSHA compliant, highly visible safety yellow color

• LED power On indicator

• 15 Amp, 125-Volt rated

• Automatic reset feature restores power without user assistance

BENDER
GFCI 100AMP BATE

BENDER LG100

With the inherent dangers of electricity in and around water, safety must always be your first consideration. HydroFlex stocks the Bender LG100-120v GFCI for use with our HydroPar 4k HMIs or for any of your electrical devices that will be near a body of water.

The LG100 - 120v Standard is the most reliable and tested 100amp GFCI in the industry. The LG100 incorporates a LED chain from 0% to 100% on the user interface that allows you to see how close the unit is to tripping. And with this NEMA 4x rated housing you are guaranteed that the electrical safety of you cast and crew is not compromised! We even have an optional model that is completely DIMMABLE! Having this ability allows the user to protect a circuit that needs to be dimmed or have an effect during the scene- especially where a wet location is near.

For more information, visit the http://www.lifeguardgfci.com target=_blank>Bender Lifeguard website.

HYDROFLEX
HYDROPAR HMI 1200W

HydroPar 1200w M1 HMI lighting systems are state-of-the-art underwater lights specifically designed for feature and commercial film production. Modular components, underwater mateable connectors incorporating the mate first/break last grounding circuit and integrated ground fault sensors (GFCIs) which prevent electrical accidents, make these lighting systems safe, flexible and easy to set up.

Compact and lightweight, the 1200w can be tailored to a variety of shooting situations. HydroPar 1200w HMIs mate to a 5/8 inch spud for compatibility with standard grip and lighting equipment. The globe is an industry standard 1200w SE making replacement easy anywhere in the world.

The HydroPar 1200w M1 HMI light is for underwater use only. It is available with interchangeable reflectors for spot, medium and flood configurations. Because the bulb is enclosed in a tight fitting glass envelope, the beam pattern is adjusted by using the interchangeable reflectors to collimate the light. We use reflectors, not par diffuser lenses, to adjust the beam in this light. When a par diffuser lens is placed underwater so that both surfaces (especially the inner shaped surface) have water contact, the ability of the diffuser to spread light is significantly reduced.

HYDROFLEX
HYDROPAR HMI 4000W

The HydroPar 4000W M1 HMI light is for underwater use only. It is available with interchangeable reflectors for spot, medium and flood configurations. Because the globe is enclosed in a tight fitting U/V coated quartz envelope, the beam pattern is adjusted by using interchangeable reflectors to collimate the light. We use reflectors, not par diffuser lenses, to adjust the beam. When a par diffuser lens is placed underwater so that both surfaces (especially the inner shaped surface) are wet, the ability of the diffuser to spread light is significantly reduced. Underwater, the glass diffuser has an effective index of refraction of 1.108 and hence, not a lot of bending power. Depth rated to 100 ft., it weighs 30 lbs. on the surface and 11 lbs. underwater.

HYDROFLEX
HYDROPAR TUNGSTEN 5KW

The HydroPar 5000W M1 Incandescent light is for underwater use only. It is available with interchangeable reflectors for spot, medium and flood configurations. Because the globe is enclosed in a tight fitting U/V coated quartz envelope, the beam pattern is adjusted by using interchangeable reflectors to collimate the light. We use reflectors, not par diffuser lenses to adjust the beam. When a par diffuser lens is placed underwater so that both surfaces (especially the inner shaped surface) are wet, the ability of the diffuser to spread light is significantly reduced. Underwater, the glass diffuser has an effective index of refraction of 1.108 and hence, not a lot of bending power. Depth rated to 100 ft., it weighs 22 lbs. on the surface and 6 lbs. underwater.

HYDROFLEX
SEASUN LITEPANEL

With the cooperation of the Litepanels company, HydroFlex has housed their popular 5600K 1x1 LED panel to create the SeaSun Litepanels 1x1, a small, flat underwater light with a beautiful soft output. Measuring only 3inch x 13 inch x 13 inch (without the mounting yoke) and weighing only 1 lb. in the water it is easily hand-held or tucked into a tight spot in a cramped underwater set such as a sinking car. The daylight output of the LEDs can be easily gelled underwater with pre-cut laminated sheets in a variety of color temperatures. The cool running temperature of the LEDs allows the SeaSun Litepanels 1x1 to burn in or out of the water.